I dette afsnit vil du kunne finde et stort udvalg af ventiler til industrien, vores store lager af butterflyventiler, spadeventiler, gate og globe ventiler, check valves, gummikompensatorer, vacuum og trykregulatorer samt et stort tilbehørs udvalg så som pneumatisk cylindre, aftaster, elektriske aktuator, med positions giver, gearkasser, stamme forlængere, ekstra håndtag, det vi ikke har på hjemmesiden kan vi skaffe så bare giv os et ring.
The 240L series Y-strainer consists of a stainless steel body, flanges RF PN16, a bolted bonnet with BSP threaded drain plug and a TFM 4215 gasket. It is suitable for low temperature fluids in chemicals, pharmaceuticals or petrochemicals.
EPDM single wave/Steel flanges This 1501 series elastomeric expansion joint, galvanised steel flanges, EPDM single bellows, hardened steel cable, PN10 flange connection for water supply and distribution networks.
EPDM single wave/Steel flanges This expansion joint series 1502, elastomeric, with flanges in galvanised steel, single bellow EPDM, hardened steel cable, flanged attachment PN16 for water supply and distribution networks.
EPDM single wave/Steel flanges L=130mm The expansion joint series 1505, elastomer, length 130, with galvanised steel flanges, PN10 flanged attachment, single bellows EPDM, hardened steel cable for water supply and distribution networks.
NBR single wave/Steel flanges The 1503 series elastomeric expansion joint, in steel, with PN10 flanges, with single NBR bellow, vibration absorption for mineral oils, hydrocarbons and fuel oils.
NBR single wave/Steel flanges L=130mm The 1506 series elastomer expansion joint, in steel, PN10 flanged, length 130, with single NBR bellow, vibration absorption for mineral oils, hydrocarbons and fuel oils.
Option For 1501 & 1503 - Supplied with screws set - Expansion joint & flanges not included.
TEGUFLEX RED L130 / ST STEEL FLANGES The industrial expansion joint series 1560, red, EPDM, rotating flanges, carbon steel retaining ring, for hot water up to 90°C, cooling water, salt solutions, chlorinated solutions, ester.
HIGH TEMP. TEGUFLEX PN16 The Teguflex industrial expansion joint series 1562, double red, EPDM, high temperature, with rotating flanges, carbon steel retaining ring, for hot water, heating, steam, hot air.
EPDM Liner - PN10/16 The Teguflex industrial expansion joint series 1561 red, white, EPDM, ACS certified, rotating flanges, carbon steel retaining ring, for drinking water.
TEGUFLEX EPICHLO YELLOW L130 The Teguflex1563 industrial expansion joint, yellow epichlorohydrin, with rotating flanges, carbon steel retaining ring, for butane gas, propane, water, salt solutions, alkalis, mineral oils, aerosol.
PN10/16 The expansion joint for industry Teguflex series 1564, green, CSM, with rotating flanges, carbon steel retaining ring, for strong and concentrated acids, compressed air and oil sprays.
PN10/16 STEEL FLANGES / TEGUFLEX The expansion joint for industry Te series 1566, SBR, blue, with rotating flanges, carbon steel retaining ring, for abrasive materials resistant to hydrocarbon-laden water: weathering, sludge, calcium, etc.
STAINLESS STEEL FLANGES The industrial expansion joint Teguflex series 1565, NBR, FDA, white, with rotating flanges, carbon steel retaining ring, for foodstuffs, fats and oils.
For Chemical high temperature The industrial expansion joint Teguflex series 1567, double violet, FKM, with rotating flanges, carbon steel retaining ring, for highly aggressive chemicals at high temperatures.
F321 bellow & liner/Steel flanges The metal expansion joint series 1521, with flanged bellow PN16, rotating steel flanges, stainless steel hydroformed bellow for common fluids compatible.