Our Actuated Valves are mechanically operated by a electric or pneumatic actuator. Choose a category below.
Resistance heater 3W - S2 duty service: 50% of time - Declutchable manual override by key (included).
Resistance heater 5W - S2 duty service: 70% of time - Manual override by key (included), except SA05 S.
ATEX Ex II 2 G Eex d IIB T4, areas 1 & 2 - Resistance heater 5W - Manual override by key (included).
Includes control card 0-10 V , 2-10 V, 0-20 mA, 4-20 mA.
Back to original position if lack of current - Built-in rechargeable security battery.
Specifications and equipment: same as NA actuator, except ATEX II 2 G EExd II B T4.
Specifications and equipment: same as NA - Back to original position if lack of current - Built-in rechargeable security battery.
Specifications and equipment: same as NA - Setting and diagnosis local control.
Room temperature range: -20°C/+60°C - S4 duty service: 25% of time - 360 starts/h in peak - 2 setting strokes ±2°.
Room temperature range: -25°C/+55°C. Specifications: On/off multi-turn actuators - ISO 5210 pad - S4 duty service: 25% of time / 10 cycles/hour.Standard equipment: Resistance heater 20 W - Torque limiter - Safety handwheel - Electrical connection:not included.
Specifications: On/off multi-turn actuators - ISO 5210 pad - S4 duty service: 25% of time / 10 cycles/hour.Standard equipment: Resistance heater 20 W - Torque limiter - Safety handwheel - Electrical connection:not included.
Specifications: On/off multi-turn actuators - ISO 5210 pad - S4 duty service: 25% of time / 10 cycles/hour.Standard equipment: Resistance heater 20 W - Torque limiter - Safety handwheel - Electrical connection:not included.
Coupling type: B3 - Machined steel drive nut for splined shafts. Specifications: On/off multi-turn actuators - ISO 5211 pad - Room temperature range: -25°C/+80°C -S2 intermittent duty service: 15 mn. Standard equipment: Resistance heater 20W - Torque limiter -Safety handwheel - Electrical connection: M20, M25 & M32 x 1,5.
Coupling type: A - Non-machined brass drive nut. Specifications: On/off multi-turn actuators - ISO 5211 pad - Room temperature range: -25°C/+80°C -S2 intermittent duty service: 15 mn. Standard equipment: Resistance heater 20W - Torque limiter -Safety handwheel - Electrical connection: M20, M25 & M32 x 1,5.