wastewater and water are two areas where the valves are very important for what comes out of the system, our large program of butterfly valves of the type LUG or WAFER with different rubber types such as EPDM, EPDM high temperature, NBR, FKM, silicone, Teflon, metallic seal and silicone liner means that we can supply to any industrial parts that may wish to use butterfly valves for this purpose.
in the wastewater area we have a large program within knife gate valves on these valves there are also a large selection of seals such as EPDM, EPDM high temperature, NBR, FKM, silicone, Teflon, metallic seal and silicone liner and there available for these valves both manually handle air cylinder, spring return air cylinder, electrically actuated AUMA or REGADA
all our valves have a wide selection of spare parts that can be purchased as loose parts and extra accessories.
Wafer - Between flanges ANSI 150 More about 1115 - Between flanges ANSI 150 - BodyA216WCB / DiscCF8M 1115 Series - Butterfly valve - Double eccentric - Steel A216WCB - Butterfly Steel - Fire Safety - ISO PN20 ANSI 150 Ears centering (Wafer) Fire Safe according to ISO 10497:2010 Platinum ISO 5211 direct mounting
(only for butterfly valves 1113, 1114, 1115 & 1116) More about 1193 - Gear box with position indicator (only for butterfly valves 1113, 1114, 1115 & 1116) 1193 Series - Helical wheel for butterfly valves 1113/1114 Manual gearbox with steering wheel position indicator
Manual valves equiped with SF012 limit switch box IP67 - SPDT 250V-5A (see features page 66). - See features of the valve page 31. More about 1150 - DiscGGG50(DiscCF8M up to DN100)/ SeatEPDM Manual valves equiped with SF012 limit switch box IP67 - SPDT 250V-5A
See features of the valve page 31. More about 1153 - Disc CF8M / SeatEPDM 1153 Series - Butterfly valve - Body Cast iron EN-GJS500 7 - Butterfly Steel - EPDM liner Ears centering (Wafer) insulation for long Col Platinum ISO 5211 through shaft Cuff dovetail removable
Non pinned shaft version Bi directional Loose rubber liner Dry shaft design Series 13 & 20 face to face options
Stainless steel seat High flow velocity (15m/s) High pressure (40 bar) Drop-weight actuator option
Built in operation/ test controller Built in stop valve option Minimum operating pressure 0.3 bar Compact design & light weight Optional: plumbed outlet design, vitreous enamel coating, 0.1 bar minimal pressure
Built in operation/ test controller Built in stop valve option Minimum operating pressure 0.3 bar Compact design & light weight Optional: plumbed outlet design, vitreous enamel coating, 0.1 bar minimal pressure
Built in operation/ test controller Built in stop valve option Minimum operating pressure 0.1 bar Lockable isolating valve Optional stainless steel EPDM coated float
Built in operation/ test controller Built in stop valve option Minimum operating pressure 0.1 bar Lockable isolating valve Optional stainless steel EPDM coated float
Automatic & economical Adjustable setting Maintenance free Optional solenoid valve
Large body to prevent clogging Leak tight at very low pressure Compact design Optional plumbed outlet design
Large body to prevent clogging Raised mechanical parts to prevent jamming Instantaneous operation Leak tight at very low pressure
Large body to prevent clogging Leak tight at very low pressure Compact design Optional plumbed outlet design
Optional by-pass Leak tight at low pressure Optional adjustable closing weights or external springs Optional safety pressure relief valve Optional stainless steel seating Protective guard options
Silent closing Full bore Low head loss Resilient seated
Low sealing torques Easy maintenance Resilient & metal seat options Optional 100 % stainless steel version
Metal or resilient seat options Horizontal or vertical installation Short face to face dimensions Low head loss coefficients Stainless steel, Duplex & Super Duplex executions